Cassette to MP3 Converter
G725
Instructions for Use
Please read and retain these instructions for future reference
v001: 27/01/20
How to play cassettes
1.
Put 2x AA batteries into batteries case.
2.
Fit the cassette in position and close the door.
3.
Plug speaker or earphones to AUX.
4.
Press PLAY button to play cassette.
5.
Adjust the volume.
6.
Press STOP on the top to pause.
How to record cassette into USB flash drive (manually)
1.
Put 2x AA batteries into batteries case.
2.
Fit the cassette in position and close the door.
3.
Plug speaker or earphones to AUX.
4.
Insert USB flash disk, and green LED is on.
5.
Press PLAY button to play cassette.
6.
Maximize the volume.
7.
Press
to record, and LED turns green and flashing.
8.
Press
pause, and green LED stops flashing.
9.
Press STOP on the top to end.
How to record cassette into USB flash drive (AUTO)
On auto mode standalone cassette to MP3 converter will detect each interval between two songs, and will
save the two files. So normally, if you have 6 songs on side A (or B) of your cassette, just put cassette in and
play, then press RECORD button. After 6 songs played, 7 mp3 files will be automatically saved on your USB
drive. There will be 7 files for a 6 songs tape, the rec00000-rec00006 will be the effective MP3 files for 6
songs, the last one rec000006 is an empty one due to the short space between the end of 6
th
song to the end
of whole tape.
The Converter will create a new folder name “jlrec” in your USB flash drive, and save each MP3 name
“rec00000 to rec99999”.
1.
Connect 5V DC USB cable to computer or push the right-side switch to open, then fit 2xAA batteries in
battery case.
2.
Fit the cassette in position and close the door.
3.
Plug speaker or earphones to AUX.
4.
Insert USB flash drive, and green LED is on.
5.
Press
about 3-5 seconds, until LED turns blue from green.
6.
Press PLAY button to play cassette.
7.
Maximize the volume.
8.
Press
to record, and LED turns blue and flashing. It will identify each song and record them
separately.
9.
Press
to pause, and blue LED stops flashing.
10.
Press STOP on the top to end.
