The Altitude 500
11570
Instructions for Use
Please read and retain these instructions for future reference v003: 17/04/19
Remote control holder
Hold the remote control holder into position
on the back of the fan as shown and secure it
with the two screws packed with it (arrowed).
WARNING: Only use the screws supplied with
the remote control holder. Use of other
screws could damage the product.
Keep the remote control out of reach of
young children.
The remote control may be stored in the
holder when required.
PLACEMENT
Place the fan on a flat, stable surface close to a power outlet and out of the reach of children and pets.
Check that the power cord is not hanging where it can be pulled accidentally or cause a trip hazard.
The fan must stand on its base. It is not suitable for wall or ceiling mounting.
Moving the fan
Disconnect the fan from mains power. Lift the fan by the carrying handle and move it to a new position.
OPERATION
The fan can be operated from the touch pads on top of the unit or by pressing the buttons on the remote
control that duplicate all the control functions.
Status indicators
The control panel status indicators indicate the current operating modes of the fan –
