Car
Battery Charger
11123
Instructions for Use
Please read and retain these instructions for future reference v001: 17/04/18
APPLIANCE AND THE CONFINES OF THE AREA IN WHICH IT IS SITUATED. WE RECOMMEND A
MINIMUM CLEARANCE AROUND ALL FACES OF AT LEAST 10CM.
BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE
FOUND. TAKE CARE NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE
INTERNAL DAMAGE.
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a BS 1363 13-amp plug. If you have to replace the fuse, only those that
are ASTA or BSI approved to BS1362 and with a rated current of 13-amps should be used. If there is
a fuse cover fitted, this cover must be re-fitted after changing the fuse. If the fuse cover is lost or
damaged the plug must not be used. Spare fuse holders and fuses are available from electrical
outlets. If the socket outlets in your home or office are not suitable for this product’s plug, the plug
must be removed and disposed of safely. Attempts to insert the plug into the wrong socket is likely
to cause electric hazard. A replacement plug should be wired according to the following
instructions:
The cable
A mains electricity cable contains two or three inner wires. Each has a core of copper and an outer
layer of flexible plastic. This product is double insulated; the wires in the cord set are colour coded
in the following way:
BLUE
NEUTRAL
BROWN
LIVE
GREEN & YELLOW
EARTH
The diagram below shows the key features of a correctly wired three-pin mains plug.
The mains supply cord of this appliance cannot be replaced; if the cord is damaged, the appliance should
be discarded.
DISPOSAL
•
Dispose of all packaging, paper, cartons, plastic and plastic bags
in accordance with your local recycling regulations.
•
At the end of the product’s lifespan please dispose of it at an
authorised household WEEE waste recycling centre.
Note:
Double insulated appliances do not
need the green & yellow Earth wire.
They may only have the Brown and
Blue wires.
