background image

 
 

 

 Car

 

Battery Charger             

11123                            

Instructions for Use 

 Please read and retain these instructions for future reference                                                                           v001: 17/04/18 

 

from the cell. The weighted float inside the hydrometer will register the condition of that cell. Put 
the fluid back into the cell after testing, taking care not to splash the fluid about. 
Always wash out the hydrometer after use. 
 

FAQs 
If the “POWER” LED fails to light: 

 

Switch off immediately at the mains. 

 

After switching off the mains supply, switch on and check again. 

 

Ensure the leads are not damaged. 

 

If the panel lights flicker and go out: 

 

Switch off immediately at the mains. 

 

Ensure that the output leads are not touching. 

 

Check to see that the positive and negative leads are connected to the correct terminals. 

 

Important Notice 

If the “Power” and “Full” LEDs are illuminated and there is no output charge to your battery, please 
check if your battery is defective. 
 

SAFETY INSTRUCTIONS: 

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE 
FOLLOWED: 

 

READ ALL INSTRUCTIONS BEFORE USE. 

 

TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT IMMERSE CORD, PLUG OR APPLIANCE, IN 
WATER OR ANY OTHER LIQUID. 

 

UNPLUG FROM OUTLET WHEN NOT IN USE AND BEFORE CLEANING.  

 

DO NOT OPERATE ANY APPLIANCE WITH A DAMAGED CORD OR PLUG OR AFTER THE 
APPLIANCE MALFUNCTIONS, OR HAS BEEN DAMAGED IN ANY MANNER. WE RECOMMEND 
THAT THE POWER CORD IS NOT KINKED OR STORED IN A TWISTED MANNER, AND THAT YOU 
REGULARLY CHECK ITS CONDITION. 

 

THE USE OF ANY ACCESSORY ATTACHMENTS NOT RECOMMENDED BY COOPERS OF 
STORTFORD MAY CAUSE INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE. 

 

DO NOT USE OUTDOORS. 

 

DO NOT LET CORD HANG OVER THE EDGE OF A TABLE OR COUNTER, OR TOUCH HOT 
SURFACES. 

 

DO NOT PLACE ON OR NEAR HEAT SOURCES. 

 

USE ON A LEVEL, STABLE SURFACE. 

 

DO NOT

 COVER THE ITEM IN ANY WAY WHEN IN USE AS THIS MAY CAUSE OVERHEATING. 

 

DO NOT USE THIS APPLIANCE FOR ANY OTHER USE THAN THE INTENDED USE IT IS DESIGNED 
FOR. 

 

ENSURE THERE IS SUFFICIENT DISTANCE BETWEEN THIS APPLIANCE

 

AND OTHER ITEMS ON 

THE WORK SURFACE OR WORK STATION, OR SUFFICIENT DISTANCE BETWEEN THE 

Reviews: