• electric humidifier
7
Before cleaning of the appliance, please, make sure that it is unplugged.
Otherwise, it may result in electric shock.
Before cleaning, please, wait for complete cooling of water in grooves – to
avoid burning your hands.
Clean the appliance once or twice a week.
9.1. Wipe an external surface of the appliance with wet and soft cloth.
To avoid the electric shock, do not scratch and damage elements of the
appliance, while cleaning.
Do not clean the appliance with solvent, gasoline, xylene, scrub brush, talc
powder and other substances, except for water.
9.2. Wipe remaining water within the groove under the tank with wet and
soft cloth.
Water remaining on small components may be wiped by a soft brush. Then
clean these components with soft cloth.
9.З. If the membrane is dirty, clean it with a soft brush.
8.4. Use a soft brush to wipe remaining water on the nozzle surface and
then wipe it again with soft cloth.
9.5. Wash the water tank and diffuser with pure water. Wash the cover
accurately and lightly. Otherwise, it will result in leaking of water through
the cover.
After removing of water from the diffuser surface, wipe it with soft cloth.
Clean the external surface of the appliance with wet and soft cloth.
* not included in the delivery set
In case of emergency, please, use the troubleshooting methods shown in
tables. If it is impossible to solve problems with these methods, apply to
the service center.
9. CLEANING AND MAINTENANCE
10. TROUBLESHOOTING
IMPORTANT!
To avoid deformation and abrasion of working
surfaces, resulting in lowering of diffusion level or
other defects, do not use metal brushes, razors or talc
powder to wipe the nozzle surface.
In case of a heavy shock, the tank may leak.
In case of a water leak, stop the appliance operation
immediately and apply to the service center.
To keep the appliance dry, remove water after cleaning
and dry the water tank and the case.
Make sure that there is no water left within the water
tank and the case.
Before a long pause in use of the appliance, please,
dry the tank and the surfaces, install the tank into the
case and pack the humidifier in a plastic bag, and
then – in a box.
Keep the appliance in a room with low humidity.
Keeping of the appliance in undried condition may
result in moldiness.
Table 2
3. Steam settles airborne dust onto surface.
1. Used water contains much magnesium or calcium. It is necessary to use
water pretreated in a household water filter or distilled water removing the
filter beforehand.
2. Remains of calcium and manganese salts accumulated inside the
appliance. It is necessary to clean the appliance inside.
3. Steam settles airborne dust onto surface.
Problem
Possible cause
Remedy
Poor atomizing (insufficient capacity)
The unit is operating in the minimized
mode (low atomizing frequency)
There is no problem. If you need
to switch to the intensive mode of
operation, turn the regulator handle
all the way to the right.
The atomizer is clogged
Clean the atomizer.
Temperature of water in the tank
is too low
Set maximum capacity. The
humidifier’s capacity will go up
after a while.