3
CGTS NUV Surface Mount Instructions
CGTS NUV Surface Mount Instructions
IB519158EN www.cooperlighting.com
8.9
06
*
0.
9-
6
2
±0.
52
4
*609.8
569.8±2
A
A
4xR2.25
+1
0
+1
0
Figure 7.
Figure 8.
Figure 9.
Figure 10.
Installation Instructions
ote:
N
It is the installer’s responsibility to create the
required electrical supply prior to installing the
mounting frames.
ote:
N
The 2x2 Installation Diagram. The 1x4, 2x4 and 2x2
installation method are the same.
Mark the hole position on the celing
Re-connect power & test
Remove end
piece
Secure to ceiling
Masonary mounting
Ceiling
Wall plugs
Screws
Insert panel light & connect driver
Frame
Frame end piece
Reassemble frame
Step 1:
Mark the mounting hole position on the ceiling, using
the assembled frames as reference. (See Fig. 8.)
Step 2:
Drill the holes according to the marks to suit
mounting surface.
Step 3:
For masonry mounting, insert the wall plugs into the
holes.
Step 4:
Secure the fully assembled frame onto the ceiling
with screws.
Step 5:
Remove one side of the fully assembled frame.
Step 6:
Insert the LED panel light into the frame slot and
connect the driver and power supply.
Step 7:
Reassemble the end piece onto the frame.
Step 8:
Connect power and confirm correct operation.
Figure 11.
Figure 12.
