2
iLumin Plus
Planning the Installation
TSE55-B is designed to be wall mounted or in either Portrait
or Landscape orientation.
TSE55-B requires a minimum mounting depth of 1in
(2.45cm) from the front wall surface plus room for cable/s.
Power is supplied by Power Over Ethernet (PoE). PoE must
meet the IEEE 802.3af standard. TSE55-B connects to the
local network via a hard wired Ethernet connection.
Back Box
TSE55-B
Mounting Bracket
PoE and Data Connection (RJ45)
Mounting Height
The recommend mounting height for the TSE55-B is
57 - 64in (145-165cm) above the finished floor to the center
of the unit.
57” / 145cm
64” / 165cm
Installation
TSE55-B has been designed to mount to a Standard UK
single gang back box, a standard European single gang back
box as well as a standard US NEMA single gang back box.
Minimum depth: 47mm
The mounting frame, included with this unit, should be
attached to the back box using the screws supplied with the
back box.
UK
EURO
NEMA
Installing Mounting Frame
TSE55-B includes a mounting frame that must be used for
this installation.
Using the screws supplied with the backbox, mount the
mounting bracket onto the back box
Mounting the TSE55-B
Align the mounting frame hooks with the TSE55-B mounting
slots and gently push the TSE55-B unit onto the mounting
bracket.
Make sure the mounting hooks are properly engaged
.
Using a precision Phillips head
screw driver, tighten the 2
captive screws (one at each
side) to secure the TSE55-B to
the mounting bracket.
Power Connection
TSE55-B is designed to be powered over the Ethernet
connection (PoE).
