Page 6
4. Press
.
The display shows “Panic Alarm Deleted”.
To register a device with the user, re-enter
the User Menu and select
Users - Edit User
.
Select the user and then the device type you
wish to add.
Adding Users
When adding a new user you can also al-
locate them proximity tags, remote controls
and panic alarm transmitters. If you do not
wish to do so at that point then you can as-
sign them later by using the
Edit User
menu
Edit User
Edit User
option.
To add a new user:
1. Enter the User Menu and select
Users -
Add User
.
The display shows a default user name,
for example: “User 04”. Edit the name if
required.
2. Press
when you have fi nished editing
the name.
The display shows the default type for a
new user (Normal User, see “Adminstra-
tion” for a description of user types).
3. Select the type you want to assign to the
new user and press
.
The display asks you to assign a new user
code.
4. Key in the user code you want the new
user to employ. Key it in a second time
when prompted by the display.
The display asks you to present a proxim-
ity tag to the keypad.
5. Present a unused tag to the keypad. If
you do not want to assign one to the user
press
.
The display then asks you to press a but-
ton on any remote control that you want
to assign to the user.
6. Press a button on a remote control (one
that is not currently registered to any
other user). If you do not have one press
.
The display fi nally asks you to press both
buttons on any PA that you want to as-
sign to the new user.
7. Press both buttons on a PA that you wish
to assign to the user. If you do not have
one for the user press
.
The display should now tell you that the
new user has been added to the system.
When you press the button the control
unit learns the identity of the remote con-
trol and registers it to the user.
If the control unit has already learned
that remote control then you will hear a
low tone and the display tells you that the
remote control is already in use.
2. If you do not wish to register a remote
control press
.
PA (Panic Alarms)
A PA is a two button transmitter, used to
start a Panic Alarm. To activate the transmit-
ter you must press both buttons at the same
time. On some models a third button acts as
a lock so that you can prevent the PA going
off when carrying it in your pocket.
Note: While you are registering a new PA the
control unit will not respond to an alarm
signal from any pendant it has already
learned.
To allocate a panic alarm to a user, select
Users - Edit User - User(nn) - Panic Alarm
.
1. Squeeze both buttons on the PA.
When you squeeze the buttons the con-
trol unit learns the identity of the PA and
registers it to the user.
If the control unit has already learned
that PA then you will hear a low tone and
the display remains unchanged, asking
you to press the buttons on the PA.
2. If you do not wish to register a panic
alarm press
.
You cannot register more than one PA per
user.
Deleting Remote Controls, Tags and PAs
If a user has lost a remote control, tag or
panic alarm then you should delete it from
the system to make sure that no unauthor-
ised person can use it. Also, if you wish to
reassign a device to another user, you must
fi rst delete it from the system.
1. Enter the User Menu and select
Users -
Edit User
.
The bottom line of the display shows the
fi rst in a list of the users currently recog-
nised by the system.
2. Press
or
to display the user whose
device you wish to delete, then press
.
The bottom line of the display shows
“Name”.
3. Press
or
until the bottom line shows
the type of device you wish to delete,
then press
.
If the user you selected in step 2 has a
device registered to them then the dis-
play asks if you wish to delete it, for ex-
ample: “Delete Panic Alarm?”.