Digital Wall Switch Timer
13
Cooper Lighting Solutions
Installation instructions
SINGLE POLE WIRING
THREE-WAY WIRING
OPERATION
1. To turn load ON, press the START/STOP button momentarily.
• The LCD will display the count-down time interval selected. The time interval will start counting down.
TROUBLESHOOTING GUIDE
1. To test the unit, set the DIP Switch to the minimal time-out interval (5 minutes).
2. If the unit does not function:
a.
Check the ground wire. Make sure the box has good ground and is attached properly.
b. Check all other wiring to make sure connection is secure.
c.
Check if power is turned back on at the main circuit breaker panel.
d. If the unit still does not function, consult the factory.
3. If the load will not turn OFF automatically:
a.
Check if the load goes ON/OFF when pressing START/STOP button. If not, check the red wire for good connection.
If load does go ON/OFF, consult the factory.
