Cooper Wheelock SAFEPATH4 SP4-LOC Installation And Operation Manual Download Page 15

15

Warranty

 Limited Warranty

Cooper Wheelock, Inc. products must be used within their published specifications and
must be PROPERLY specified, applied, installed, operated, maintained, and
operationally tested in accordance with these instructions at the time of installation and at
least twice a year or more often in accordance with local, state and federal codes,
regulations and laws.  Specification, application, installation, operation, maintenance, and
testing must be performed by qualified personnel for proper operation in accordance with
all of the latest National Fire Protection Association (NFPA), Underwriters' Laboratories

(UL), Underwriters’ Laboratories of Canada (ULC), National Electrical Code (NEC),

Occupational Safety and Health Administration (OSHA), local, state, county, province,
district, federal and other applicable building and fire standards, guidelines, regulations,
laws and codes including, but not limited to, all appendices and amendments and the
requirements of the local authority having jurisdiction (AHJ). Cooper Wheelock, Inc.
products when properly specified, applied, installed, operated, maintained, and
operationally tested as provided above are warranted against mechanical and electrical
defects for a period of three years from date of manufacture (as determined by date code).
Correction of defects by Cooper Wheelock, Inc providing repairs or a replacement shall
be at Cooper Wheelock, Inc.'s sole discretion and shall constitute fulfillment of all
warranty obligations.
The foregoing limited warranty shall immediately terminate in the event any part not
furnished by Cooper Wheelock, Inc. is installed in the product. The foregoing limited
warranty specifically excludes any software required for the operation of or included in a
product. COOPER WHEELOCK, INC. MAKES NO REPRESENTATION OR
WARRANTY OF ANY OTHER KIND, EXPRESS, IMPLIED OR STATUTORY
WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OR ANY OTHER MATTER.
Users are solely responsible for determining whether a product is suitable for the user's
purposes, or whether it will achieve the user's intended results. There is no warranty
against damage resulting from misapplication, improper specification, abuse, accident, or
other operating conditions beyond Cooper Wheelock, Inc.'s control.
Some Cooper Wheelock, Inc. products contain software. With respect to those products,
Cooper Wheelock, Inc. does not warranty that the operation of the software will be
uninterrupted or error-free or that the software will meet any other standard of
performance, or that the functions or performance of the software will meet the user's
requirements. Cooper Wheelock, Inc. shall not be liable for any delays, breakdowns,
interruptions, loss, destruction, alteration, or other problems in the use of a product
arising out of or caused by the software.
The liability of Cooper Wheelock, Inc. arising out of the supplying of a product, or its
use, whether based on warranty, negligence, or otherwise, shall not in any case exceed
the cost of correcting defects as stated in the limited warranty and upon expiration of the
warranty period all such liability shall terminate. Cooper Wheelock, Inc. is not liable for
labor costs incurred in removal, reinstallation, or for damage of any type whatsoever,
including but not limited to, loss of profit or incidental or consequential damages. The

Summary of Contents for SAFEPATH4 SP4-LOC

















Reviews: