Cooper Lighting McGraw-Edison Talon Series, Brochure & Specs

Page: 16 / 24

15
16
O ACCESSORIES
A R M M O U N T
Standard 8" [TLM] or 10 1/2" [TLL]
extruded aluminum arm features internal
bolt guides for twin support rods. Round
pole mounting accommodated by utilizing
provided round pole adapter between the
fixture arm and pole shaft.
E X T E R N A L M A S T A R M A D A P T E R [MS]
Cast aluminum mast arm adapter secures
fixture head to nominal 2" [2 3/8" O.D. pipe
size] horizontal steel tenon arm. Adapter
casting slip fits over tenon arm and is
secured via two [2] stainless steel bolts.
W A L L M O U N T [WM]
Wall mount plate secured to wall via four [4]
lag bolts [lag bolts supplied by other]. Wall
mount kit includes 1/2" thick steel adapter
plate, a 8" [TLM] or 10 1/2" [TLL] machined
extruded aluminum arm and two [2] fixture
support rods.
T E N O N A D A P T E R
Tenon adapters available to slip fit over poles
equipped with nominal 2" pipe size steel tenon
[2 3/8" O.D., 4" length] or nominal 3" pipe size
steel tenons [3 1/2" O.D., 5" length]. Adapter
secures to tenon via six [6] stainless steel
bolts. For complete configuration availability,
see Tenon Adapters on page 16.
P O L Y C A R B O N A T E V A N D A L S H I E L D [VS]
Internally mounted 3/16" thick molded
polycarbonate lens, treated with UV inhibitor
to discourage the gradual discoloration that
results from exposure to sunlight and UV
radiating sources.
Q U A R T Z R E S T R I K E [Q + EM + EM/SC]
Optional quartz restrike [Q] energizes auxiliary
quartz lamp upon power reactivation and
extinguishes once HID lamp re-ignites. Quartz
restrike with time delay [EM] adds cold start
activation. Emergency Separate Circuit [EM/SC]
allows the quartz lamp socket to be wired to
an independent relay controlled power source.
P H O T O C O N T R O L R E C E P T A C L E [R]
Fixtures available with gasketed photocontrol
receptacle for mounting a standard NEMA
photocontrol [ordered separately]. Medium
housing also available with a button-style
photocontrol [P].
I N T E R N A L H O U S E - S I D E S H I E L D [HS]
Internal house-side shield reduces light
concentration behind the pole while
maintaining street side efficiency. Internal
house-side shields available on Type II, III, IV
and AF distributions.
E X T E R N A L H O U S E - S I D E S H I E L D
[MA1213-XX + MA1214-XX]
External house-side shield provides sharp
cutoff behind the pole and shields the lamp
from direct view. Mounted to the door frame
via double-sided VHB adhesive [TLM] or three
[3] stainless steel fasteners [TLL]. Rotatable in
90° increments, the external house-side shield
provides industry leading glare and spill light
control.
[Arm Mount] [WM]
[MS]