317
TRACK
LIGHTING
Four Circuit
COOPER LIGHTING
HALO
®
L 9 0 0
O u t l e t B o x C o v e r
Can be used at any electrical feed connection
point (Live, Straight, L, T or X). Size: 5” sq.
Screws included.
Finishes:
White (P), Black (MB)
L 9 2 3
S t r a i g h t C o n n e c t o r
To connect two track sections end-to-end. May
be used as feed point.
Finishes:
White (P), Black (MB)
L 9 2 5
T C o n n e c t o r
To connect three track sections into a T
Configuration. May be used as feed point.
Finishes:
White (P), Black (MB)
L 9 5 4
P e n d a n t K i t
To suspend track from the ceiling. Order as
follows: 2 kits for 2’ Trac; 2 kits for 4’ Trac; 3 kits
for 8’ Trac; 4 kits for 12’ Trac. 18” threaded steel
stem, one canopy and mounting hardware.
Finishes:
White (P), Black (MB)
L 9 8 2
C o n d u i t C o n n e c t o r
A Live End Connector for use with surface
conduit. Designed to accept standard 3/4” trade
size conduit fitting (not supplied).
Finishes:
White (P), Black (MB)
L 9 8 3
T- B a r A t t a c h m e n t C l i p
Allows track to be attached to inverted tee
ceiling. Order as follows: 2 kits for 2’ Trac; 2 kits
for 4’ Trac; 3 kits for 8’ Trac and 4 kits for 12’ Trac.
L 9 2 1
L i v e E n d C o n n e c t o r
To start a run.
Finishes:
White (P), Black (MB)
L 9 2 4
L C o n n e c t o r
Connects two track sections at a right angle.
May be used as feed point.
Finishes:
White (P), Black (MB)
L 9 2 6
X C o n n e c t o r
To connect four track sections into a cross
configuration. May be used as feed point.
Finishes:
White (P), Black (MB)
L 9 6 3
S i n g l e - C i r c u i t t o F o u r- C i r c u i t
C o n v e r t o r w i t h S w i t c h
Allows any Halo Power-Trac lampholder
(except solid state low voltage and L3218, L3232,
L3239, L5120, L5130, L5138) to be used with Four
Circuit Trac.
One converter is required for each
Power-Trac lampholder used.
This adapter is
designed to fit into the trac in either of two
directions. Facing in one direction, it makes
contact with circuits 1 and 2, with a 3-position
switch (on-off-on) used to select the desired
circuit. To connect the fixture with circuits 3 or 4,
the adapter is removed from the trac, turned
180°, and is then re-inserted into the trac.
L963 is rated at 500 watts maximum.
Finishes:
White (P), Black (MB)
D E 6 2 1 D e a d E n d
Replacement Dead Ends for Four-Circuit track (6
included)
Finishes:
White (P), Black (MB)
