1
Fold in tabs for corresponding
mounting method.
1
Remove Top Lens and Reflector
2
Using provided Hardware secure fixtures to MOUNTING BRACKET,
and connect fixtures together as shown.
3
Re-Install Reflector and Top Lens
2
3
Fold Tab A if fixture to be joined to another fixture (row).
Make electrical connections and tuck wires into wire cavity
prior to hanging fixture on mounting bracket.
#10-32 Screw
Hardware should be positioned
at bottom of keyhole slot and
tightened securely.
#10-32 Nut
#10 Star Washer
Fold Tabs B and C if fixture to be mounted as single unit
or if fixture is at end of row.
See Page 1 Mounting Bracket Specifications and Dimensions.
INSTALLING FIXTURES
ROW MOUNTING
WALL LED Luminaire
INSTALLATION
JAYLUM
ADE130028
REFLECTOR
TOP LENS
A
B
C
Wire fixture to requirements following all
National and Local Electrical Codes.
Tuck wires back into fixture.
Hang Fixture on MOUNTING BRACKET
and secure with included fasteners.
Pull wires from J-Box thru end of fixture
for easy wiring while fixture is hanging.
