EN
G
L
ISH
6
Call for customer service and/or missing or damaged parts (800-334-6871)
FPO:
Image Copy for Tags
Is there power to the fixture?
• Check to see that the circuit breaker has not been tripped.
• Be sure the wall switch is in the “ON” position.
• Be sure that the bulb is not burned out or broken.
Is the surrounding external ambient light too bright? (If so
the unit may think it
!
s daytime.)
• Re-aim the head.
• Relocate or reposition the unit away from the light.
TURN OFF POWER BEFORE CONTINUING.
Is the wiring to the fixture loose?
• Check wiring, and reconnect if necessary using wire
nuts provided.
Outdoor lights do not come
on with motion at night
Is there motion in the detection zone?
• Make sure the sensor is not picking up moving objects such
as trees, traffic, etc.
TEST FOR YOURSELF.
• Cover the sensor lens with cardboard to prevent
sensor from detecting motion. If the lights stay off, some
thing in the detection zone is triggering the sensor.
• If this is the case, reduce the sensitivity.
• Reposition motion sensor.
*If the lights stay on with sensor lens covered, contact cus-
tomer service.
Outdoor lights come on for
no apparent reason at night
Is there motion in the detection zone?
• Make sure the sensor is not picking up moving objects such
as trees, traffic, etc.
• If this is the case, reduce the sensitivity.
• Reposition motion sensor.
If there is no motion, then the unit may be in the override
mode.
• Turn the light switch to the “OFF” position for 40
seconds, and then back to the “ON” position. This will send
the unit back into the AUTO mode.
*If the lights continue to stay on, contact customer service.
Lights stay on at night and do
not turn off
The light given off from the unit
!
s own lamp(s) is affecting the
motion sensor.
• Re-aim lamp(s).
• Reposition motion sensor.
Lights continuously blink on
and off at night
Is the switch on the bottom of the motion sensor in the test
mode?
• Move the switch to the 4 MIN or 12 MIN position.
Is the motion detector shadowed?
• Reposition motion sensor.
Lights are on
during the day
Is the surrounding external ambient light too bright? (If so the
unit may think it
!
s daytime.)
• Re-aim the head.
• Relocate or reposition the unit away from the light.
Are you allowing adequate time to enter the dusk to dawn
mode?
• Turn power on and off twice within 3 seconds.
Is there more than one fixture on an indoor wall switch?
• If so, put them on separate switches.
Cannot activate dusk to dawn
mode at night (override)
What to do if. . .
MS180_W 825-0216.qxd:MS180 325-1553.qxd 6/26/08 2:58 PM Page 6