Small, OUTDOOR
CYI
(C
ontinuous
, Y
oke mount
, I
ntegral ballast
)
Visor and Non-Visor
Warning
: Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
Installation Instructions
Vault
C-Scroll
Roundel
These installation instructions valid with the above Ametrix styles.
5
6
Sheet 3 of 5
4
ADY071451 REV A(ECN070306)
Powerside fixture
Center hub
assembly
Cover plate and
gasket
Attaching fixture to center hub assembly
Attaching fixture to end hub assembly
Ensuring the fixtures are sealed for outdoor use
1. Remove gasket and cover plate from center hub assembly.
2. Feed wire from new fixture into center hub assembly.
3. Secure fixture head with both #6-32 x1/4" tapered set screws.
4. Attach all wires and ensure all connections are properly
matched.
5. Hide wires in hub assembly and re-attach cover plate and
gasket.
#6-32 x1/4"
Tapered set screw
(x2)
Gasket
Hub end
cap
#6-32 x1/4"
Tapered set screw
(x4)
End cap
Final fixture
in run
Final hub assembly
1.
To end run, secure fixture head to end hub assembly inserting
hub cap and securing both #6-32 x1/4" tapered set screw end
screw.
2.
Replace end cap and gasket and secure with #6-32 x1/4"
tapered set screws.
Hub gasket
Hub gasket
Hub end
cap
1.
Ensure all socket cap screws are tightened to 10 in/lbs. (For proper torque sequence refer to supplemental page)
2.
Ensure all hub caps are secured with two #6-32 x.25 tapered set screws to ensure proper compression of the hub gaskets.
3.
Ensure a proper seal between the hub assembly mounting plate and the outdoor surface.
#6-32 x5/8"
Socket cap
screw
#6-32 x5/8"
Socket cap
screw
#6-32 x5/8"
Socket cap
screw
#6-32 x1/2"
Socket cap
screw
#6-32 x1/2"
Socket cap
screw
#6-32 x1/4"
Tapered set
screw (x4)
Hub gasket
