COOPER FIRE CTPR3000, Installation Manual

Page: 20 / 51

Touch Screen Display
The Touch Screen is a multi-function display consisting 320x240 dots featuring high
intensity backlighting. In normal operation, the display indicates as above with the
backlighting off.
During an event on the system the display shows the FIRST EVENT and LAST
EVENT plus other events as space allows.
The last 2 lines are normally used to display the total number of events, but they are
also used for scrolling fire conditions, faults, pre alarms or disabled devices
independently or for displaying a reduced menu when in fire condition.
When an event occurs the Touch Screen backlighting comes on unless there is a mains
power supply fault.
Use the Touch Screen to scroll through all active events on the system by using the
SCROLL UP and SCROLL DOWN buttons (available at access level 1). You can display
the contents of the log and also view details of any fires, faults, pre-alarms,faults or
disablements.. When displaying the system menu on the Touch Screen, the last 5 lines
of the display are shown in reverse text.
Supervisor
Fires
0 Pre
Alarms 0 Faults
0 Disabled
0
Tuesday
dd-mm-yyyy
16:25.25
BST On
20
Repeater Panel
System Healthy