The 2, 5, 7, and 10 button Chilli Control Panels from
Cooper Controls provide an elegant solution. These
buttons are used to output a memory or sequence which
has been previously programmed into the Chilli / Spice
dimmers on the network or to turn the outputs off.
Where fitted, raise, and lower buttons compliment the
usual selection buttons to allow immediate changes to
the intensity of any memory.
An optional infrared remote control allows similar
functionality from anywhere within the room via the
detector built into the front panel of the Chilli Control
Panel (2, 5, and 7 button only). The Chilli Control Panel
is connected to the dimmers using a Chilli Network
connection.
Chilli Control Panel
Installation guide
Supplied parts
Front cover
Screws
Main body
Dimensions
The Chilli Control Panel fits into standard single gang
47mm deep UK backbox. Backboxes available from
Cooper Controls.
Series 3 Panels (Clip-on Cover)
Use the screws provided to attach the panel to the
backbox before clipping the front cover onto the
assembly.
86.01 mm (3.39 in)
86.01 mm (3.39 in)
39.01 mm
(1.54 in)
Fixing to a wallbox
Introduction
Welcome
