80
www.cooperbussmann.com/wirelessresources
Cooper Bussmann 945U-E Wireless Ethernet Modem & Device Server User Manual
Rev Version 2.14
Internal Throughput Test
Before testing, ensure that the end node of the Wi-Fi link that you wish to test has the Iperf server enabled under
the Advanced Radio Settings page and Saved to Flash, and the module has been reset. See “3.9 Advanced Radio
Configuration.”
NOTE TCP Throughput test must be run using Microsoft Internet Explorer 8 or later.
Figure 81 Throughput Test Configuration
To run an internal throughput test:
1. Connect to the webpage of the module that will be performing the Iperf test.
2. Select the “System Tools” link on the right pane of the webpage, and then select “TCP Throughput Test.”
The screen shown in Figure 82 appears.
Figure 82 Throughput Test
3. Enter the IP address of the remote device that you wish to test, and click
Measure Throughput
.
