9
• Press the “Assign Sensor” button. The sensor will now appear in the sensor list.
• Repeat this process to add more sensors to this network.
Note:
Sensors contain initial factory data that should be cleared before collecting new data. To do this, click the
“Clear Data” link.
2. Adding Additional Gateways.
• Choose the “Manage” tab from the main navigation bar.
• From the “Newtwork Settings” pane on the left, select the network you would like to add the
gateway to.
• In the section “Gateway List / Assign Gateway”, enter the Gateway ID and Security Code from
label of the gateway you want to add.
• Press the “Assign Gateway” button. The gateway will now appear in the gateway list.
3. Creating Additional Networks.
• Choose the “Manage” tab from the main navigation bar.
• From the “Network Settings” pane on the left, click the “Add Network” link and a new network
will appear in the list. To change the default name of this network, (e.g., Network 3355) in the
“Network Details” pane, click the “Edit Network Details” icon
.
• Enter a new name and then click “Save” and the network will appear in the settings list.
There are two checkboxes in this section:
Holding Network - leave unchecked for normal system operation. Check the box if you wish to set up
a gateway, sensors and a network but you do not wish to actively collect data from
live sensors.
Send notifications for this Network - if checked, any set notifications will be sent (see page 13).
• Under “Gateway List / Assign Gateway”, enter the Gateway ID and Security Code from the
gateway you want to add, then press “Assign Gateway”. The gateway will now appear in the
gateway list.
