background image

Unit 

Specifications 

and Featu

res

                                                                                                                                                                                       

 Page 7 

                                                             

Room 

Temperature

63°-90°F (17°-32°C)

32°-86°F (O°-30°C)

50°-90°F (10°-32°C) 

Outdoor 

Temperature

64°-109°F (18°-43°C)

 19°-75°F (-7°-24°C)

 52°-109°F (11°-43°C)  

19°-109°F (-7°-43°C)

 

(For models with low-temp cooling systems)

64°-109°F (18°-43°C) 

64°-126°F (18°-52°C)  

 (For special tropical models)

64°-126°F (18°-52°C)   

(For special tropical models)

COOL mode

HEAT mode

DRY mode

COOL mode

HEAT mode

DRY mode

Room Temperature

(17°C - 32°C)

63°F - 90°F

(0°C - 30°C)

32°F - 86°F

(10°C - 32°C)

50°F - 90°F

Outdoor 

Temperature

(0°C - 50°C)

32°F - 122°F

(-15°C - 30°C)

5°F - 86°F

(0°C - 50°C)

32°F - 122°F

(-15°C - 50°C)

5°F - 122°F

(For models with 

low temp. cooling 

systems.)

To further optimize the performance of your unit, do the following:

• 

Keep doors and windows closed.

• 

Limit energy usage by using TIMER ON and TIMER OFF functions.

• 

Do not block air inlets or outlets.

• 

Regularly inspect and clean air filters.

FOR UNITS WITH 
AUXILARY ELECTRIC 
HEATER

Achieving Optimal Performance

Optimal performance for the COOL, HEAT, and DRY modes can be achieved in the following 

temperature ranges. When your air conditioner is used outside of these ranges, certain safety 

protection features will activate and cause the unit to perform less than optimally.

Inverter Split Type

Fixed-speed Type

When outside 

temperature is below 0°C

 (

32°F 

), we strongly  

recommend keeping the

unit plugged in at all 

timers to ensure smooth

ongoing performance. 

Summary of Contents for Sophia CH-S30FTXW-SV























Reviews: