button
button
button
This function only applicable for some models.
Ɣ
Ɣ
Ɣ
Pressing this button in COOL or DRY mode, the
icon
“ “ is displayed and the indoor fan will
continue operation for a few minutes in order to
dry the indoor unit even though you have turned
off the unit. After energization, X-FAN OFF is
defaulted.X-FAN is not available in AUTO, FAN
or HEAT mode.
This function indicates that moisture on evapor-
ator of indoor unit will be blowed after the unit is
stopped to avoid mould.
Having set X-FAN function on: After turning off
the unit by pressing ON/OFF button indoor fan
will continue running for about a few minutes. at
low speed. In this period, press X-FAN button to
stop indoor fan directly.
Having set X-FAN function off: After turning off
the unit by pressing ON/OFF
button, the complete unit will be off directly.
Clock time adopts 24-hour mode.
The interval between two operation can't exceeds 5s.
Otherwise, remote controller will quit setting status.
Operation for T-ON/T-OFF is the same.
Under COOL or HEAT mode, press this button to
start up sleep function.
" " icon is displayed on remote controller. Press
this button again to cancel sleep function and " "
icon will disappear.After powered on, Sleep Off is
defaulted. After the unit is turned off, the Sleep
function is canceled.
In this mode, set temperature will be adjusted with
the change of time. Under Fan, DRY and Auto
modes, this function is not available.
Ɣ
Ɣ
Ɣ
Press this button to set clock time. " " icon on
remote controller will blink. Press "
Ÿ
" or "
ź
"
button within 5s to set clock time. Each pressing of
"
Ÿ
or "
ź
" button, clock time will increase or
decrease 1 min. If hold
Ÿ
or "
ź
" button, 2s later,
time will change quickly. Release this button when
reaching your required time. Press "CLOCK"
button to confirm the time. " " icon stops blink-
ing.
button
Ɣ
Under on and off status, you can set T-OFF or T-ON
simultaneously.
Before setting T-ON or T-OFF, please adjust the
clock time.
After starting up T-ON or T-OFF, set the constant
circulating valid. After that, air conditioner will be
turned on or turned off according to setting time.
ON/OFF button has no effect on setting. If you don't
need this function, please use remote controller to
cancel it.
I FEEL
Please put the remote controller near user when
Press this button to start I FEEL function and " "
will be displayed on the remote controller. After
this function is set, the remote controller will send
the detected ambient temperature to the controller
and the unit will automatically adjust the indoor
temperature according to the detected tempera-
ture. Press this button again to close I FEEL func-
tion and " " will disappear.
button
this function is set. Do not put the remote con-
troller near the object of high temperature or low
temperature in order to avoid detecting inaccu-
rate ambient temperature. When I FEEL function
is turned on, the remote controller should be put
within the area where indoor unit can receive the
signal sent by the remote controller.
SLEEP
X-FAN
CLOCK
NOTE
NOTE
NOTE
"T-OFF" word "OFF" will stop blinking. " " icon
resumes displaying. Cancel T-OFF
：
Under the
condition that T-OFF is started up, press
"T-OFF" button to cancel it.
Press this button to turn on or turn off the health
and scavenging functions in operation status.
Press this button for the first time to start scaveng-
ing function; LCD displays " ". Press the button
for the second time to start health and scavenging
functions simultaneously; LCD displays " " and
" ". Press this button for the third time to quit
health and scavenging functions simultaneously.
Press the button for the fourth time to start health
function; LCD display " ". Press this button
again to repeat the operation above.
