Cooper & Hunter CH-S07BKP6, Owner'S Manual

Page: 23 / 54

Installation of indoor unit
07
、
09K
、
12K
、
18K: 24K:
Outdoor unit connection
violet orange
yellow-
green
2 4 5 N(1)
blue black
3. Remove the wire clip; connect the power connection wire to the wiring terminal
according to the color; tighten the screw and then fix the power connection wire
with wire clip.
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
1. Connect the drain hose to the outlet pipe of
outlet
pipe
drain hose
drain hose
tape
outlet pipe
drain hose
insulating pipe
● Add insulating pipe in the indoor
● The plastic expansion particles are
1. Open the panel, remove the screw
on the wiring cover and then take
wiring cover
screw
panel
Step seven: connect wire of indoor unit
Step six: install drain hose
indoor unit.
2. Bind the joint with tape.
Note:
drain hose in order to prevent
condensation.
not provided.
down the cover.
21
Outdoor unit connection
yellow-
green
brown violet orange
N(1)
blue black
2 3 4 5