Cooper & Hunter CH-FK18SWK2, Installation & Owner'S Manual, Page: 22 / 28

5.Usage
19
5.4. Usage of remote controller
5.4.1 Function of “ F.Cool ” and “ F.Heat ”
Pressing the key “ F.Cool ” , the system will be automatically set to cooling mode , high
wind speed and automatic wind direction.
Pressing the key “ F.Heat ” , the system will be automatically set to heating mode , high
wind speed and automatic wind direction.
5.4.2 Setting of clock
Press the key “ CLOCK ” and hold till the relative light flashes, then you could start to
set the time. Press the key “ + ” or “ - ” to increase or decrease the setting temperature.
Press the key “ CLOCK ” again to save setting and return to main interface.
5.4.3 Setting of timing startup or shutdown
TIME OFF
The key is available when the unit is on.
01 The number 01 means the unit will shut down automatically after 1 hour and
so forth.
TIME ON The key is available when the unit is on.
01 The number 01 means the unit will turn on automatically after 1 hour and so
forth.
5.4.4 Setting of Sleep Mode
a.Press the key “ SLEEP “ ， the system will be automatically set to sleep mode, then
you could start to set the sleep time ,press the key “ TIME OFF ” to increase the sleep time
.press “ SLEEP ” once again for cancelling sleep mode.
b.You can setting of sleep mode only in cooling mode and heating mode .
In cooling mode, the target temperature will increase 1
℃ after one hour ， the target
temperature will increase 1 ℃ after two hours ,it will not changing after later.
In heating mode ,the target temperature will decrease 1 ℃ after one hour ,it will
decrease 1 ℃ after two hours ， it will decrease 1 ℃ after three hours once again ， it will not
changing after later.
Meaning
Cooling temperature
Heating temperature
Default
26
℃
20
℃
Remark
adjustable
adjustable
5.4.5. Parameter