10
Mains lead replacement
Do not attempt to repair or replace the mains connecting cable yourself, consult a qualified
electrician.
This product is supplied with a fitted plug which contains a
13A fuse. If you are simply replacing the fuse, you must
use a 13A fuse which has been approved by ASTA to
BS1362.
If the plug does not fit the socket or becomes damaged, a
new plug must be fitted. Replace the original plug with the
correct plug for your socket. If this is a 3-pin (square pin)
13A (BS1363) plug, you must make sure that it is fitted
with an ASTA approved 13A fuse. If another type of plug is
used, it must be protected by a 15A fuse, either in the plug
or at the distribution board.
1. Remove the existing fitted plug.
2. The wires in the mains lead supplied with this appliance are coloured in accordance with the following
code:
GREEN/YELLOW = EARTH (E) BLUE = NEUTRAL (N) BROWN = LIVE (L)
This product must be earthed
As the colours of the wires in the mains lead may not correspond with the colour markings identifying the
terminals in your new plug, proceed as follows.
The wire which is coloured GREEN or GREEN/YELLOW must be connected to the terminal which is
marked with the letter E or
E
symbol or coloured GREEN or GREEN/YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the
letter N or coloured BLACK or BLUE.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or
coloured RED or BROWN.
3. Ensure that the connections are tight and that no loose strands are left out of the terminals.
IF IN ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN.
GREEN/
YELLOW
(EARTH)
BLUE
(NEUTRAL)
BROWN
(LIVE)
FUSE
CABLE
CLAMP
Plug replacement
Figure 12 - plug wiring
