Page 5
General cleaning
It is recommended to clean and wipe out the freezer regularly or after any spillage inside or outside the
appliance.
Use a teaspoonful of bicarbonate of soda diluted in a pint of warm water. Wipe the internal surfaces and
shelving to remove food residues. Leave to dry before reloading food.
Wipe the outside casing from time to time in order to remove dirt and dust from ventilation vents etc.
Keep water away from the thermostat housing.
Clean the door seals.
Remove accumulated dirt from around the compressor motor taking care not to damage the pipes and the
wiring.
Maintenance and cleaning
Important
The fridge must be turned off at the mains before maintenance or cleaning.
When not in use
If the appliance is to be emptied and turned off for a long period it is advisable to:
O
O
Disconnect the unit from the mains supply.
O
O
Empty the freezer of food and allow any ice that has formed to melt.
O
O
Clean and dry the interior.
O
O
Leave the door open.
Door reversal
Reversing the door may make installation more
convenient. The appliance must be tilted and
supported in order to carry this out; it is
therefore advisable to get an assistant to help
during this procedure. Take care when fitting
and tightening screws.
FIGURE 4
Use a screwdriver to prise off the two blanking
plates, and remove the two screws securing the top
of the worktop.
WORKTOP
BLANKING
PLATE
SCREW
