1. Freezer drawers
Page 3
Parts identification
The parts are listed and numbered below to help
identification.
FIGURE 1
1
Important
Make sure that the voltage marked on the rating label on the product corresponds with the voltage in your
home.
This quality product has been tested and certified to meet all applicable UK electrical and safety standards.
Installation and controls
The appliance is designed to work in room
temperatures b16°C and +32°C. Do not
allow the room temperature to 32°C
otherwise the temperature inside the freezer will
rise.
The freezer requires space around the casing for
efficient cooling and operation. The minimum
clearances are shown in Figure 2.
There must be at least 100mm clearance between
the appliance and the rear wall
The freezer must be installed on a firm flat and
level surface for it to work quietly and efficiently.
Switching on
Plug the appliance into a nearby power socket and
switch on. The thermostat control (Figure 3) is at
the back of the appliance. Turn the control to the ‘5’
position on the dial and leave the appliance running
with the door closed for approximately 2 hours. This
will allow the inside temperature to stabilise.
FIGURE 3
TEMPERATURE
CONTROL
Diagrams show alternative methods of providing correct air
flow around the appliance.
FIGURE 2
100mm
100mm
25mm
25mm
