Page 6
Controls and operation
A
Power ON indicator
B
Fridge temperature control
C
Freezer temperature indicator (orange)
D
Temperature warning indicator (red)
E
. Audio warning cancel button
F
. SUPER FROST indicator (yellow)
G
. SUPER FROST ON/OFF button
H
. Freezer temperature control
A.
POWER INDICATOR
This lights up when the appliance is connected to
the mains supply.
(The temperature warning light
will illuminate on first initial switch on.)
B.
REFRIGERATOR TEMPERATURE SETTING
Use the key supplied to turn this control to set the
temperature inside the fridge compartment. Turning
the control clockwise lowers the temperature inside
the fridge.
C.
TEMPERATURE INDICATOR SCALE
The temperature inside the freezer is shown on this
scale in °C. A temperature between –18° to –21°C
is ideal for everyday operation. In SUPER FROST
mode, a temperature of –32°C may be indicated.
D.
ALARM INDICATOR
If the internal temperature of the fridge rises above
what is a safe temperature for food storage, the
indicator light will show and the buzzer will sound.
When this happens, check the continuity of the
power supply, see if the fridge door is fully closed,
or turn the controls to change the temperature
inside the fridge or freezer.
The light will also go out when the temperature
inside the freezer falls below –5°C. The Alarm
Indicator illuminates when the fridge freezer is first
switched ON or after defrosting.
E.
BUZZER CANCEL
When the buzzer sounds, press the button to
silence it.
F.
SUPER FROST INDICATOR
This light shows when the SUPER FROST switch
is pressed.
G.
SUPER FROST
Pressing this button puts the freezer into SUPER
FROST mode. The freezer will stay in this mode
until it automatically reverts to normal operation, or
the button is pressed to cancel SUPER FROST
mode. The indicator light will go out when this
happens.
H.
FREEZER TEMPERATURE SETTING
Use the key supplied to turn this control when
setting the temperature inside the freezer. Turning
the control clockwise lowers the temperature inside
the freezer. A temperature of –18°C to –20°C is an
ideal setting.
ERROR INDICATION
Temperature sensors are placed in the fridge and
freezer.
If there is a problem with a sensor the red ALARM
[
D
] indicator will
blink
.
Contact the Helpline on 0870 909 9100 for advice
when this occurs.
Switching on
Before use, allow the appliance to stand for 12
hours to allow the cooling gases to stabilise after
installation.
Plug the fridge freezer into a nearby power socket
and switch on. The green ON indicator light will
show. Use the key supplied and turn controls [
B
]
and [
H
] to a midway position. Leave for 4 hours
before filling with produce. This allows the
temperature to drop inside the fridge freezer.
Adjustment of the freezer control
[H
] may be
needed to achieve a temperature of between –18°
to –20°C.
The fridge temperature must be ideally between 3°
to 5°C
