Page 3
Parts identification
Location
Important
Make sure that the voltage marked on the rating label on the product corresponds with the voltage in your
home.
This quality product has been tested and certified to meet all applicable UK electrical and safety standards.
FIGURE 1
The parts are listed and numbered below to help
identification.
1.
Control panel
2.
Lamp housing
3.
5 x shelves
4.
2 x salad crispers
5.
2 x egg/dairy produce balcony shelves
6.
3 x bottle holders
7.
Super Frost drawer
8.
2 x Freezer drawers
1
2
3
4
5
6
7
8
The fridge freezer should be placed on a flat, level and solid surface.
If the fridge freezer is placed on a plinth it must be flat, able to support the weight of the fridge freezer and
be fire resistant.
Position the appliance away from direct heat sources or direct sunlight.
Allow adequate clearance around the appliance for adequate ventilation. See Figure 6 for housing unit
dimensions.
Never install the appliance in a room where the ambient temperature reaches below zero degrees. This will
affect the operation of the fridge freezer.
