1. Thermostat and lamp housing
2. Wire shelf
3. Glass shelf
4. Salad/vegetable crisper
5. Bottle rack
6. Balcony shelves
7. Egg rack
Page 3
Parts identification
The parts are listed and numbered below to help
identification.
FIGURE 1
1
2
3
4
5
6
7
Important
Make sure that the voltage marked on the rating label on the product corresponds with the voltage in your
home.
This quality product has been tested and certified to meet all applicable UK electrical and safety standards.
Installation and controls
FIGURE 2
SPACER
CONDENSER
The appliance is designed to work in room
temperatures b16°C and +32°C. Do not
allow the room temperature to 32°C
otherwise the temperature inside the fridge will rise.
Fit the spacers onto the condenser tubes (Figure 2)
and put the cleaning tip in the drainage hole at the
back of the fridge compartment.
