Coolster ATV-3050C, Manual

Page: 18 / 29

P34 P35
The drive chain adjustment
1
、
loosen the fixed chain adjuster screw and nut.
2
、
For tensioning chain, the chain by rotating clockwise
direction on the M6 regulator anti-reteat-pine nut and nut. If
required relax chain, according to the direction of rotation 10,000
anti-chain adjuster on the M6 and the prevention of anti-retreat
Pine Nut Nut.
Forward and rear axle into. The same should be fully rotate the
regulator of the M6 and the prevention of anti-retreat Pine Nut
Nut, Pian would maintain coaxial.
3
、
in the adjustment, must tighten all loosen the parts.
4
、
in the adjustment, the chain must tighten regulation of the
fixed screws and muts.
Note: chain relaxation too small engines and other key will zero
overloading. Relaxation should be made to maintain the
prescribed limit scope.
Ad juster Setscrew Ad juster
The drive chain lubrication
The chain includes many mutual operation of the parts. If the
chain would not carry out proper maintenance, the chain that
will soon wear. Therefore, we must carry out regular
maintenance of the chain. In this dusty region riding car, the
more maintenance is necessary.
1, may use any brands of spray-chain lubricant. First, the use
of brush or cloth to remove all the dirt and mud masonry. Then
two rows of siding between the center and all spraying
lubricant on the roller.
2, For cleaning chain, will be removed from the board, the
Baptist in solution should as far as possible removal of masonry
scale. The chain removed from the solution and make it dry.
The chain lubrication will be carried out immediately to
prevent corrosion.