Super 80 Professional – AOM
AUTO-FLIGHT
Section 8 Page 13
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
FMA – LEGEND LIGHTS
1. Flight Mode Annunciator Legend Lights
ILS Light (Amber)
The Legend comes on when a deviation
between LOC/GS1 and LOC/GS2 has
been detected.
Horizon Light (Amber)
Not currently simulated.
Heading Light (Amber)
Not currently simulated.
Monitor Light (Amber)
Not currently simulated.
No Autoland Light (Amber)
The legend comes on steady whenever
a situation that does not permit autoland
has been detected. The light comes on
flashing during the Autoland Preflight
Test.
AP Trim Light (Amber)
This legend indicates that the autopilot
has a sustained out-of-trim horizontal
stabilizer condition.
FD Light (Blue)
Indicates that the FD switch on the
glareshield is in the FD position.
AP1/AP2 Light (Blue)
The AP1/AP2 light indicates whether
DFGC 1 or DFGC 2 is providing guidance
input.
2. RESET Button
Pushing this button resets the ILS, HORIZON,
MONITOR and NO AUTOLAND legend lights
on the FMA. Push the button a second time
to recall all legend lights that has been reset.
The Reset button will also reset the THROTTLE
and AP legend lights.
