8
Reversing the Door
This refrigerator has the capability of the door opening from either the left or right side. The unit is
supplied with the door opening from the left side. Should you desire to reverse the opening direction,
please see the following reversal instructions.
1. Remove the screw hole plugs on the top left (1).
2. Remove the upper hinge cover (2) and screws (3).
3. Remove the freezer door (5) and place it to a padded surface to prevent scratching.
4. Remove the mid hinge and screws (6,7)
5. Lift the fridge door and place it to a padded surface to prevent scratching (8).
6. Remove the bottom hinge (9,10) and transfer it to the same location on the opposite side.
7. Remove the hole cover (7) and transfer it to the same location on the opposite side.
8. Place the fridge door on the lower door hinge on the left, then the mid hinge, freezer door and top
hinge on the left side.
9. Install the upper hinge cover onto the upper hinge
Replacing
the
light
The
CMST125
models
are
fitted
with
an
energy
efficient
long-life
LED
light.
If
the
light
needs
to
be
replaced
this
must
be
done
by
a
qualified
engineer.
Light
spec
is
E14,
220-240V,
50Hz,
0.8W.
