Shenzhen Coolmay Technology Co.,Ltd
CX-WIFI-2NET module user manual
www.coolmay.com
Page
91
, Total 93 pages
Question 5: Two WIFI modules are set as STAs, which are
interconnected by APs and do transparent serial ports. How to set
them?
As shown in the figure, because the CX-WIFI-2NET module can also be
used as an AP, the AP here uses the CX-WIFI-2NET module as an
example:
1# module is AP, the default setting can be
2# module is STA, WAN IP is 10.10.100.100, TCP Server
The 3# module is STA, the WAN IP is 10.10.100.101, TCP Client, and the
protocol address is WAN IP of the 2# module: 10.10.100.100. The ports of
the 2# and 3# modules are the same, which is 8899.
The 2# module LAN IP is changed to 10.10.99.254, and the 3# module
LAN IP is changed to 10.10.98.254 to avoid conflict.
Question 6: How to avoid IP address conflict when using CX-WIFI-2NET
module?
The range of dynamically assigned IP addresses of the CX-WIFI-2NET
module can be defined as between .100 and .200.
For example, the default address is 10.10.100.254. When the module is
used as an AP, the address assigned to the STA is from 10.10.100.100.
Start, up to 10.10.100.200.
Therefore, if the address needs to be statically assigned in the network, the
address that can be allocated is 10.10.100.1~10.10.100.99, so as to avoid
