manualshive.com logo in svg

Coolix MPM3-10CRN1, Instructions For Use Manual

Share
Download
Coolix MPM3-10CRN1 Instructions For Use Manual Download Page 22

EN

47

Problem

Possible cause

Solution

Inadequate cooling

Temperature setting is too high.

Lower the set temperature.

The air filter is clogged with dust.

Clean the air filter.

Loud or vibrates

The base is not adequately firm or flat. Place the appliance on a flat, 

firm base.

Sound

The sound comes from the flowing 
of the coolant in the air-conditioner.

This is normal.

Compressor does not function and 
the digital display shows “P2”

The bottom container is full.

Remove the plug from the bottom 
outlet and let the water out.

The 

 control light flashes at 1 Hz 

and the digital display shows “E1”

The room temperature sensor 
is switched off or short-circuited.

Call Customer Service.

The 

 control light flashes at 1 Hz 

and the digital display shows “E2”

The evaporator temperature sensor 
is switched off or short-circuited.

Call Customer Service.

The 

 control light flashes at 1 Hz 

and the digital display shows “E3

The condenser temperature sensor 
is switched off or short circuited.

Call Customer Service.

Summary of Contents for MPM3-10CRN1



























Reviews:

No comments

Brands by name

Popular brands

Load more brands