46
TROUBLESHOOTING
Problem
Possible cause
Solution
The appliance does not start when
the button is pressed
The room temperature is higher than
the set temperature (Heat mode).
Readjust the temperature.
The room temperature is lower than
the set temperature (Cool mode).
Readjust the temperature.
Inadequate cooling
Windows and doors are not closed.
Ensure that all the windows and doors
are closed.
There are heat sources in the room.
Remove the heat sources to the ex-
tent possible.
The exhaust air pipe is not connected
or it is blocked.
Connect the pipe and ensure that it
can function properly.
Storage
1. If you intend not to use the appliance for an extended period of time, remove the lower drainage plug on the back of
the appliance and drain the water from the tank under the appliance into an external bowl (use the discharge hose
if needed).
2. Insert the plug again.
3. Let the appliance run in the FAN mode for one half day in a warm room to dry the inside of the appliance and prevent
mould accumulation.
4. Clean and replace the air filter.
5. Ensure that the power cable is wound correctly and it cannot be damaged.
Please check the following possibilities before contacting the manufacturer or his representative:
Summary of Contents for MPM3-10CRN1
Page 25: ...50 ...
