Cool Space CS5-16 Series, Operation & Maintenance Manual

Page: 9 / 24

7
5.4 Storage:
1. Remove the pads, as described in 5.1.1, clean with a soft brush and water to remove
dust and debris.
2. Drain sump using above procedure and wipe dry.
3. Store the COOL-SPACE
®
unit in a dry area and cover if possible to prevent dust
build-up.
6.0 Troubleshooting/Repair:
6.1 Troubleshooting:
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the power supply before performing any service or
maintenance on the unit. Failure to do so may result in serious injury or
death.
The COOL-SPACE ® unit consists of three systems, it is important to determine which
system of the COOL-SPACE ® unit the problem is associated with. This may not always
be obvious, in that certain problems may be associated with more than one system.
When determining which system has a problem, you must define associated problem,
(
i.e.
the pump is not running). Although this might seem a bit simplified, several things
may cause this particular problem. So while defining the problem, a careful check of all
systems should be made to fully understand the extent of the problem.
If you have a complete understanding of all of the systems of the COOL-SPACE
®
unit
and how they depend on each other, it will be simple to define and solve any problem.
Although the COOL-SPACE
®
unit is designed to be simple to maintain, it will be
necessary to have some basic hand tools (screwdrivers, pliers, adjustable wrenches, etc.)
as well a volt/ohm meter when troubleshooting the electrical system.
Fan System
CAUTION
Please use caution when troubleshooting or repairing all electrical components. Be
certain that all power is disconnected from the COOL-SPACE® unit before the
cooling pads or fan guard are removed to gain access to the fan