--
M3 SPECIFICATIONS
PREAMP SECTION
The following preamp specs are measured @ 1 kHz‚nominal
signal levels are with channel level controls set at 5‚ minimum
levels are with channel level controls set at 10.
Channel 1 and 2 inputs:
Input Impedance: 100K‚ Nominal Input
Level: -22 dBV‚ 79 mV RMS
Minimum Input Level: -40 dBV‚ 10 mV RMS
Nominal Input Level: -15 dBV‚ 178 mV RMS
Minimum Input Level: -33 dBV‚ 22 mV RMS
Channel 3 input:
Low Z Input Impedance: 5 k Ohms
Nominal Input Level: -28 dBV‚ 40 mV RMS
Minimum Input Level: -48 dBV‚ 4 mV RMS
High Z Input Impedance: 100k
Nominal Input Level: -5 dBV‚ 560 mV RMS
Minimum Input Level: -22 dBV‚ 79 mV RMS
Headphone output
Load Impedance: 8 Ohms or greater
Nominal Output: 100 mW RMS
Main line out
Output Impedance: <100
Output Level: 18 dBV
POWER AMPLIFIER SECTION
Rated power and load:
120Watts RMS/4 Ohms or 80 WattsRMS/8
(1 kHz, 1% THD @ 120 VAC line)
Frequency response:
+0, -1dB, 20Hz–20kHz @ 100 Watts
RMS/8 Ohms
Total harmonic distortion:
Less than 0.01% @ 1 kHz/8 Ohms
Typically less than 0.08%‚ 20 Hz–20kHz
Hum and noise:
Greater than 100 dB below rated power
Power consumption:
200 Watts @ 115V AC‚ 50/60 Hz‚ Domestic
200 Watts @ 230V AC‚ 50/60 Hz‚ export
Size:
Unpacking size(mm): 430X390X340
(
HxWxD)
Packing size:
Unit weight: 26kg
Packing weight:30kg
M2 SPECIFICATIONS
PREAMP SECTION
The following preamp specs are measured @ 1 kHz‚ nominal
signal levels are with channel level controls set at 5‚ minimum
levels are with channel level controls set at 10.
Channel 1 Inputs:
Input Impedance: 100 k‚ Nominal Input
Nominal Input Level: -22 dBV‚ 79 mV RMS
Minimum Input Level: -40 dBV‚ 10 mV RMS
Channel 2 Input:
Low Z Input Impedance: 5K Ohms
Nominal Input Level: -28 dBV‚ 40 mV RMS
Minimum Input Level: -48 dBV‚ 4 mV RMS
High Z Input Impedance: 100 k‚
Nominal Input Level: -5 dBV‚ 560 mV RMS
Minimum Input Level: -22 dBV‚ 79 mV RMS
Headphone Output
Load Impedance: 8 Ohms or greater
Nominal Output: 100 mW RMS
Main Line Out
Output Impedance: <100
Output Level: 18 dBV
POWER AMPLIFIER SECTION
Rated Power and Load:
80Watts RMS/4 Ohms or 60WRMS/8 Ohms
(1 kHz, 1% THD @ 120 VAC line)
Frequency Response:
+0, -1dB, 20 Hz–20 kHz @ 60 Watts RMS/8 Ohms
Total Harmonic Distortion:
Less than 0.01% @ 1 kHz/8 Ohms
Typically less than 0.08%‚ 20 Hz–20kHz
Hum and Noise:
Greater than 100 dB below rated power
Power Consumption:
150 Watts @ 115V AC‚ 50/60 Hz‚ Domestic
150 Watts @ 230V AC‚ 50/60 Hz‚ Export
Size:
Unpacking size(mm): 430X390X340
(
HxWxD
)
Packing size:
Unit weight: 15kg
Packing weight:22kg
