--
Power Switch(1)
This two-way rocker switch applies power to the unit when placed in the ON position. A blue LED on the front panel
illuminates when power is supplied.
External Speaker Jack (2)
This 1/4" jack provides the powered signal from the amplifier. Use this jack to add a second
speaker cabinet in parallel. The external minimum speaker load impedance is 8 ohms.
Main Line Out (3)
These low-noise‚ electronically balanced XLR connectors can be used to route signals to a mixing
console‚ recording device‚ etc.
Headphone Jack (4)
This 1/4" jack accepts stereo headphones only.
CH4/Monitor Input Jack (5)
Use this 1/4" jack to connect to the output of any line-level device.
Channel 3 (Channel 2 input on M2) High-Impedance Input (6)
This 1/4" jacks accepts high-impedance microphones or line-level sources equipped.
Channel 3 (Channel 2 input on M2) Low-Impedance Input (7)
For use with low-impedance microphones or other line-level sources equipped with a male XLR connector.
Channel 2 & 1 (Channel 1 on M2) Inputs (8‚ & 9)
This 1/4" jack accepts high-impedance microphones or line-level sources equipped.
Rear
panel controls
Power inlet socket
This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and
ratings for the intended operating voltage is included in the carton. The mains cord should be
connected to the amplifier before connecting to a suitable AC outlet.
Sample System
The wide range of inputs also allows input.
Mini-concert with two guitarists
You can connect microphone and telectric acoustic guitar for a mini-concert with guitarist.
Keyboardist-singer
You can connect a keyboard in along with a microphone for vocals.
Lectures or presentations
The M2/M3 is a good amplification choice for a lecture or presentation.
Karaoke or background music for an event or dance
You can connect your portable audio player or CD player for stereo playback, and independently adjust the volume of
