Cool Energy AG80JT-W20, Manual

Page: 3 / 26

I / ELECTRICAL CONNECTION

Your heater must only be installed in a fixed position in accordance with national
installation rules (for France, NFC 15100)

INDOORS USE ONLY

This installation must be done by a qualified electrician to avoid any danger.

Attention: Connect the three conductors of the supply cable to a connection box in
respecting the polarities as below:
- Live: Brown
- Neutral: Blue
-Black: Pilot wire

Warning: this product shall be installed in the outside volume only according the
national wiring rules (For France NF C 15-100)
Note: The above drawing is for reference only.
We suggest that you to contact a professional electrician for assistance.
If you are not sure, we suggest that you to contact a professional electrician for
assistance.
Mounting the device
To install your device:
Make sure distances to walls and objects are respected.
1 - Use the screws, dowels and brackets supplied by the manufacturer.
2 - For drilling dimensions, see the drilling template.
3 - Read the instructions for the steps on the installation as shown on the next page.
Outside volume
Ground
Hidden volume