Cool Compact KKM Series, Translation Of The Operating Instructions

Page: 19 / 40

19
During display of values Thi, Tlo and CND, these may be put back to 0 by
pressing additionally the info button.
Pressing this button for approx. 3 sec. starts a manual defrost.
During each defrosting process display shows “ dEF ” and the LED
defrost lights.
After the defrost process the display shows “ rEc ” for 10 Min.
Should the display show one of the following alarms, a horn
sounds at the same time which may be switched off by pressing
the button for 3 sec.
HI = temperature 10
°
C beyond set rated value
Ho = temperature 10
°
C below the set rated value
Do = door open for more than 2 minutes
HP = high pressure compressor (devices with built-in beverage cooling
counter machine only)
E1 = probe T1 defective
E2 = probe T2 defective
CL = clean the condenser
When pressing button, display shows the preset rated value
(+2
°
C = factory setting)
By pressing additionally the button or the value may be changed.
Pressing button for approx. 2 sec. brings the device into the
energy saving mode and the LED „ECO“ lights.
GB