14
1. GENERAL INFORMATION
Congratulation! You have bought a high quality refrigerated counter. All models
are under permanent quality control and of course
made in Germany
. Please
read carefully the following instructions for use carefully. This will allow a trouble
free and long lasting operation.
Series KTM/KSM/KKM:
Refrigerated counters with aggregate,
built-in cooling system, ready to plug-in.
Series KTO/KSO/KKO:
Refrigerated counters without aggregate, for
connection to a central cooling system.
Please refer to our price list and catalogues for details of our various models
regarding dimensions, gross capacity, accessories, etc.
Attention!
Please check the unit immediately at delivery. In case of transport
damages ask the driver to confirm it on your delivery note as well as on his
forwarders documents.
2. INSTALLATION AND INITIAL OPERATION
2.1 Installation
If possible, unpack the unit only at its final location, remove plastic film, check
completeness of accessories and damage free delivery.
Inform supplier immediately in case of any reclamation.
Install refrigerated counter at a well ventilated, even spot. Avoid to place it next to
heat sources or direct sunlight. Compensate floor unevenness by setting up the
hate
adjustable
feat.
(See
hereto
as
well
picture
2-4
on
page 22). Aspiration and blow out area of the installation compartment (ventilation
slots) must be kept free to ensure good ventilation.
GB
Summary of Contents for KKM Series
Page 11: ...11 D ...
Page 22: ...22 GB ...
Page 37: ...37 7 SCHALTPLÄNE WIRING DIAGRAMS SCHÉMAS ÉLECTRIQUES ...
Page 38: ...38 ...
