12
Care and maintenance
When cleaning the appliance, you should pay attention to the following
points.
•
Switch off and remove the plug from the mains electrical supply
before cleaning.
•
Do not immerse any part of the appliance in water and make sure
no water enters the appliance.
•
Wipe the external parts with a clean damp cloth. Use a little mild
detergent if the surfaces are heavily soiled.
•
Do not use scouring pads, steel wool or any form of strong solvents
or abrasive cleaning agents to clean the appliance, as they may
damage the surfaces of the appliance.
•
Disassemble and clean all the accessories separately. Accessories
need to be washed in warm soapy water. The mixing bowl can be
cleaned in a dishwasher.
•
Dry completely after cleaning before using again. Do not use the
appliance if it is damp.
•
After washing and drying, store the appliance with its accessories in
a dry, safe place out of the reach of children.
11
4.
Continue to feed ingredients until all have been fed through. For more
tender results feed the mixer through again.
Note: some of the mixture will remain in the spiral drive use some bread to
push it through you will see the colour of the mixture change as the meat is all
through. Any bread will be absorbed into the cooking process.
Using the countdown timer
The countdown timer can be used to set the exact mixing time for your
recipe. If a countdown time has not been selected the timer will
automatically count at one second intervals. Mixing will automatically stop
when the machine reaches 8 minutes.
•
Connect the mixer to the power supply. The display will show
and you will hear a beep.
•
Press the Timer selector button
to select the time, the display will
show
. Press the “+” and “–” buttons and the time will be
increased or decreased based on one-minute intervals.
•
Timer maximum setting is 15 minutes, the minimum is 1 minute.
•
Turn the speed control button
to the desired speed, the mixer
will start, and the timer will count down in 1 second intervals.
•
The mixer operation can be paused at any time by turning the
speed control button to the off ‘0’ position. This will also pause the
timer. The timer will continue to count down when the mixer is re-
started.
•
The mixer will automatically stop when the total time has elapsed.
•
Press the “+” and “–” buttons at the same time, the timer will
automatically set to zero then you can re-set the time.
5
1
2
3
4
5
6
7
8
9
10
Description of parts
1.
Main motor body
2.
Mincer attachment
3.
Mincer attachment location
4.
Clear splash guard
5.
Stainless-steel bowl
6.
Blender jug
7.
Display screen
8.
Time setting & pulse control
9.
Head tilt release button
10.
Speed control dial
11.
Mincer location cover
12.
3 mincer plates
13.
Flat beater
14.
Dough hook
15.
Access lid for blender jug
16.
Pusher for mincer
17.
Whisk
12
Summary of Contents for G1183
Page 9: ......