Cleaning and Care…
Cleaning Outsides of Appliance and Cooking Grill
1.
Remove the power cord from the wall socket and be certain the appliance is thoroughly cooled
before cleaning the appliance.
2.
Remove the Temperature Control from the appliance before cleaning, and set aside.
3.
Remove the Cooking Grill.
4.
Remove the Heating Element before cleaning by unscrewing the wing nuts and lifting the element
out, and putting it and the wing nuts aside.
5.
Wipe surface grime off the appliance, including the Lid top, Bowl, Cooking Grill and Heat Reflector
Plate with a clean damp cloth, using mild dishwashing detergent or baking soda.
6.
For stubborn surface dirt, use a citrus-based degreaser and a nylon scrubbing brush.
7.
Rinse clean with a damp cloth.
8.
Allow surface to dry fully before use.
Cleaning the Heating Element
1.
Once the Heating Element is completely cool and has been removed as outlined above, gently clean
the Heating Element with a damp cloth.
CAUTION:
Do not scratch the element’s surface or immerse in water.
Avoid impact to connection pins while cleaning as this may damage the contacts inside.
2.
When fully dry, reinstall the Heating Element.
3.
Inspect the Temperature Control and Power Cord for any possible damage, and then re-install.
Cleaning the Temperature Control
1.
If cleaning is required, once the Temperature Control is completely cool and has been removed from
the appliance, gently wipe with a damp cloth.
2.
Dry thoroughly.
CAUTION:
Do not immerse in water.
Cleaning the Drip Tray
1.
Once the Barbecue Grill is completely cool, remove the Drip Tray and empty the contents.
2.
Wash with warm soapy water.
3.
Rinse, and dry thoroughly.
Storage
1. Unplug the appliance and let it cool down thoroughly.
2. Make sure all components are clean and dry.
3. Place the appliance in a clean, dry place.
Environment
Dispose of all unwanted appliances according to local environmental regulations. Preserve the planet.
14
