CookMax 721010, Installation, Operating And Service Instructions

Page: 15 / 35

page 14
UK
USER SECTION
a
b
3. OPERATION
Connect the appliance to the mains switch which has been
previously installed. Place the blender container bottom into the
motor base and check that it is properly inserted (see Figure A). In
this way, the coupling unit will not wear out. Insert the food to be
processed and close the blender container tightly with the cover.
Use fruit cut into pieces. If ice is used, it should be previously
crushed, and other liquids should be put in the blender container
with it.
CAUTION: Never use the appliance without the cover. Never try
to put the container on the motor base when the motor is running.
The appliances have a safety system and they cannot be turned on
without the cover being properly placed on the blender container.
The blender should only be used for the time period necessary to
actually process the food.
Do not operate the appliance for long periods of time when it is
a Switch 0-1
b Speed selector
hight speed
low speed
empty.
The motor can be turned on by means of switch 0-1 (a), and the
mechanically activated indicator on the switch will turn red. The
desired operating speed can be chosen by means of selector (b).
Always wait for the motor to stop completely before removing the
cover from the blender container. After using the appliance, it is
advisable to disconnect it from the mains by means of the main
wall switch.
4. ORDINARY MAINTENANCE
Before proceeding with maintenance or cleaning, make sure that the
appliance is disconnected from the mains.
No particular maintenance is required. It is advisable to always keep
the appliance and the beaters clean. For the appliance housing, use
a damp cloth. To clean the beaters, fill the container with hot water
and turn on the appliance for a few minutes.
It is suggested not to wash the aplliance with water jets because
the item is not protected against pressured water sprays. Never
use bleach or chlorine detergents to clean the appliance.