14
5.
Slide the coffee brewing
ON
switch to
. Hot water will start
flowing from the coffee outlet nozzle. To stop the water flow, slide
the coffee brewing
ON
switch to .
Caution!
Perform the following steps if you want to prepare coffee with
milk.
6.
Move the steam
ON
switch to , the blue LED starts blinking.
7.
Once the device is heated UP, the red LED stops blinking.
8.
Fill in the mug with milk – approx. 100 g per one cappuccino cup/
mug.
Caution!
For better coffee taste, we recommend whole milk at room
temperature. The milk must not be warm.
Caution!
It is recommended to use a milk frothing mug/container
with a diameter not smaller than 70 ± 5 mm. Remember that the milk
doubles its volume. For this reason, make sure the milk mug/container
height is sufficient.
Caution!
Never rotate the milk frothing adjustment steam knob rapid-
ly. Otherwise a large amount of steam will accumulate in a short time,
posing a risk of scalding and milk may pour out of the container/mug.
9.
Put the milk frothing steam outlet nozzle into the mug/container at
a depth of approx. 1-2 cm. When frothing the milk, move the con-
tainer/mug up and down. Slowly rotate the steam emission adjust-
ment knob counter clockwise (as in the picture below), the steam
will be emitted from the nozzle.
10.
Once the required milk frothing effect is obtained, rotate the steam
