Cooke & Lewis CLLED60-BK, Instruction, Page: 17 / 36

Troubleshooting
Troubleshooting
1 7
In
more
detail...
GB IE
Cooker Hood
Fault Cause Solution
Excessive
vibration.
The appliance is not
installed properly on the
brackets.
Take down the appliance and
The fan blade is
damaged.
Switch off the appliance. Repair
service personnel only.
tightly.
Light on, but
motor does not
work.
The fan blade is jammed.
The motor is damaged.
Both light and
motor do not
work.
Light bulb blown.
Replace with a bulb with correct
rating.
Power connection loose. Check power supply.
Suction
performance
reduced.
Speed may be too low. Select a higher speed.
Distance between the
cooker hood and the hob
is too great.
Readjust the distance to:
Gas hobs: 750mm
Electric hobs: 650mm
dirty.
Care and
maintenance section.
Top vent might be
obstructed.
Clear any obstruction.
Optional vent kit might be
twisted. the manufacturers instructions.
Works normally
but cooking
smells linger.
in recirculation mode or
grease.
Care and
maintenance section.