20
Warning:
Before installation and usage read all the instructions and make sure
that the voltage (V) and the frequency (Hz) indicated on the rating
plate are exactly the same as the voltage and frequency in your
home. The rating plate can be found on the front left edge of the
inside of the refrigerator.
The manufacturer declines all responsibility in the event of the installer failing to
observe all the accident prevention regulations in force, which are necessary for
normal use and the regular operation of the electric system.
Electrical connection
Warning:
To avoid a hazard due to instability of the appliance, it must be fixed
in accordance with the instructions.
Note
Your refrigerator is intended for fitted and permanent installation.
We recommend that the appliance is connected by a qualified electrician, who
is a member of the N.I.C.E.I.C. and who will comply with the I.E.E. and local
regulations.
•
Your refrigerator comes supplied with a 13 amp plug fitted. If in future you
need to change the fuse in this plug, then a 13 amp ASTA approved (BS
1362) fuse
must
be used.
The wiring in the mains lead is coloured as follows:
Brown
Live
Blue
Neutral
Green and yellow
Earth
•
As the colours of the wires in the appliance’s mains lead may not correspond
with the coloured markings identifying the terminals in your spur box, please
proceed as follows:
The
brown wire
must be connected to the terminal marked “L” (live), or
coloured
red
.
The
blue wire
must be connected to the terminal marked “N” (neutral), or
coloured
black
.
The
green and yellow wire
must be connected to the terminal marked “E”
(earth), or by the earth symbol, or coloured
green and yellow
.
•
When the connection is completed, no stray strands or cut wire should be
present. The cord clamp must be secured over the outer sheath.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
BFU60CL-C&L-A5-GB-IM-11.indd 20
10/15/13 4:13 PM
