Cooke & Lewis 5059340127514, Manual, Page: 31 / 37

1. Under the condition of the whole machine running, click the key and key
3 seconds at the same time.
2. After 3 seconds, t he display of the Cooker Hood show s "A" and flashes 5 seconds. After 5
seconds, the di splay stops flashing. At this point, the Cooker hood enters AUTO mode, and the
working gear of the Cooker hood is automatically adjusted according to the operating status of the
induction cooker. I n automatic mode, the display only show s "A".
Exit automatic mode combination
In the Cooker Hood of automatic mode, press the key s and at the same time for 3 seconds.
The display of the Cooker Hood show s "8" and flashes 5 seconds to cancel automatic mode, then the
display will show the current working level of the Cooker Hood.
0
3
Auto mode combination
EN Use
IMPORTANT: The extraction rate of the hood will vary based upon the total power output selected on the
hob, as shown in the table below.
Each hob cooking zone has a maximum rated output of 10 comprising 1-9 and Boost (10).
NOTE: Full power or Boost only operates for five minutes maximum to conserve energy and the fan speed
will automatically drop to speed level 5 after this time.
Speed 1
This speed will be selected when there are no more than two cooking zones in use,
and the combined output is 8 or less. For example, zone 1 is on 2, and zone 2 is on 5.
Speed 3 This speed will be selected when there are no more than three cooking zones in use,
and the combined output is between 9 and 24. For example, zone 1 is on 7, zone 2 is
on 6 and zone 3 is on Boost (10).
Speed 5
If the combined output of different burners are more than 24 when there are no more
than three cooking zones in use, or all burners on with the combined output less than
or equal to 35. For example, zone 1 is on 8, zone 2 is on 8 and zone 3 is on 9.
Speed P – Boost This speed will be selected when all four cooking zones are in use, and the
combined output is greater than 35. For example, zone 1 is on 9, zone 2 is on 9, zone
3 is on 9 and zone 4 is on Boost (10).
Note:
Speed 2 and Speed 4 on the hood are not available when using this function.
If the hood controls are manually overridden when the hob and hood are linked, the hood will operate for fi ve
minutes on this manual setting before returning to control by the hob.