User Manual CONVISION CC-8xxx Cameras – Firmware 1.2.0
55/60
8
Adding a Camera to an NVR
The following gives some basic guidance for adding CONVISION CC-8xxx cameras to an NVR system that
supports RTSP streaming. Please refer to the NVR instructions for specific details on how to add and administer
cameras for the NVR system.
When adding a camera to an NVR, the NVR will likely require 3 configuration parameters from the camera:
An RTSP URL
An HTTP Port Number
The administrator username and password
8.1
RTSP URL
The RTSP URL will likely be the Profile 1 stream from the camera which by default will be in the following
format:
rtsp://<
IP ADDRESS
>/rtpvideo1.sdp
This assumes that the default port, 554, is being used, the “rtpvideo” access name is defined, and camera
profile stream 1 is being used.
Below is the Stream Setting page which defines the RTSP port and the Access Name.
If the Access Name and/or RTSP Port have been changed, then specify the RTSP URL in the following
format:
rtsp://<
IP ADDRESS
>:<
PORT#
>/<
ACESSNAME
>1.sdp
If “rtpvideo” was changed to “ev”: rtsp://10.1.21.138:555/ev1.sdp
The camera can be configured with multiple independent streams. The Video Settings page lists information
related to the different profile streams.
