User Manual CONVISION CC-8xxx Cameras – Firmware 1.2.0
27/60
3.10
Network – DDNS
DDNS is used to map a dynamically assigned IP address (a device using DHCP) with a hostname.
NOTE
: Certain network configuration will likely be required (i.e. mapping the IP address recognized by the
DDNS service to the IP camera) to implement DDNS. Therefore, the network administrator will likely need to
be consulted.
If the IP camera uses DHCP, a DDNS service can provide a hostname for use with the IP camera.
Registration with one of the DDNS service providers (ddns.nu, dyndns.org) is required for use of this feature.
3.11
Network – Access Filtering
Access filtering can be used to allow or deny access by IP addresses.
Set the Filter Type to either Allow All or Deny All is set, and then exceptions can be added to the chosen
filter type.
IP addresses can be entered as a single IP, by network or a range of IP addresses. The network option
uses the CIDR subnet mask format.
